www.chilliwave.com

Wifi Network Distribution and Billing Server
It is currently Tue Nov 21, 2017 3:56 pm

All times are UTC - 8 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: Zoneminder can't see my cameras on Mysecure ssid
PostPosted: Mon Mar 14, 2011 2:51 pm 
Offline

Joined: Thu Aug 13, 2009 2:22 pm
Posts: 12
I'm using NextGen 6.49 and firmware Gator-r4102-23/CO / 0.5.6-r4.
The Mysecure ssid has a different subnet for each radio.
How can I get Zoneminder to see the cameras?

Thx


Top
 Profile  
 
 Post subject: Re: Zoneminder can't see my cameras on Mysecure ssid
PostPosted: Mon Mar 14, 2011 4:09 pm 
Offline
Site Admin
User avatar

Joined: Fri Mar 17, 2006 4:52 pm
Posts: 4413
Location: Bend, Oregon
The port forwarding is handled in the gateway router with robin-mesh.. Login to the gateway router with WinSCP and go to this directory:

/etc/rc.d

Inside that directory, rightmouse click at the bottom of the right hand side and select NEW / FILE.. Name the file:

S99zforward

In that file, put these iptables rules, but tweak them to be your ip address of the routers with various cameras, and you can replicate this over and over for every camera..

#!/bin/sh

iptables -I PREROUTING -t nat -i eth0 -p TCP --dport 8082 -j DNAT --to 101.XXX.XXX.1:8082
iptables -I PREROUTING -t nat -i eth0 -p UDP --dport 8082 -j DNAT --to 101.XXX.XXX.1:8082

As you can see, the variables there are TCP/UDP, incoming port, target ip address, and destination port..

If you have multiple cameras, then replicate this over and over for each camera and set the ports and the ip address accordingly..

Try that out and let me know what happens.. I have a webcam setup thsi way right now and it works awesome.. The cool thing about robin mesh is that all you have to do is set this port forward in the main gateway router and it will find its way through the mesh to the correct router..

I hope that helps..
Chuck


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 8 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group